| Ancillary | TOP OF PAGE |
| A01/01 |
A high frequency oscillator |
68.9 kb |
01-Jul-1994 |
| A01/02 |
Construction & use of HF Oscillator to A1/1 |
50.0 kb |
01-Jul-1994 |
| A03/01 |
Point motor capacitor discharge power packs |
20.8 kb |
01-Aug-2000 |
| A05/01 |
Sustained Tail Lamps |
21.9 kb |
01-Oct-1986 |
| A06/01 |
Point motors: types, operation & indication |
98.4 kb |
01-Feb-1999 |
| A06/02 |
Comparative tests of three Motor-driven Point Motors |
18.4 kb |
01-Feb-2001 |
| A06/03 |
'Tortoise' Slow Motion Switch Machine (Point Motor) - Data Sheet |
134.4 kb |
01-Dec-2004 |
| A07/01 |
Reed switches |
41.1 kb |
01-Jan-1995 |
| A07/02 |
Hall effect switches |
39.7 kb |
01-Jan-1995 |
| A07/03 |
Magnets - use with Reed and Hall Effect Switches |
39.2 kb |
01-Jan-1995 |
| A08/01 |
Fast recharge capacitor discharge unit |
20.5 kb |
01-Jun-1995 |
| A09/01 |
Capacitor discharge units using transistors (Issue 2) |
47.3 kb |
01-Jun-1995 |
| A10/01 |
Light Emitting Diodes (LEDs) |
274.5 kb |
01-Apr-2019 |
| A11/01 |
Twinkling gas lamps |
303.2 kb |
01-Sep-1996 |
| A11/02 |
Gas Lamp Twinkler |
138.1 kb |
01-Feb-1998 |
| A11/03 |
Flaming Hot Air Balloons, another use for twinklers |
88.1 kb |
01-Feb-2002 |
| A12/01 |
Motorised turntable control unit(see also A17/1) |
23.5 kb |
01-Sep-1993 |
| A14/01 |
A Measured Pulse capacitor discharge unit |
91.5 kb |
01-Aug-1994 |
| A15/01 |
Meters - in model railway service |
55.2 kb |
01-Nov-1999 |
| A15/02 |
Meters - interpreting the readings |
58.1 kb |
30-Nov--0001 |
| A15/05 |
Connecting Meters to a Pentroller |
58.2 kb |
01-Aug-2000 |
| A16/01 |
The 'Heiniken' track cleaner |
20.6 kb |
01-Jul-1995 |
| A16/02 |
The 'Flying banana' motored track cleaner |
42.7 kb |
01-Sep-2001 |
| A17/01 |
Turntable Operation using SCRs (see also A12/1) |
43.4 kb |
01-Jul-1995 |
| A17/02 |
Turntable indexing using an Infrared photoreflective sensor |
515.7 kb |
01-Dec-2003 |
| A18/01 |
Welding Arc Simulator (using CMOS) |
25.6 kb |
01-Dec-1995 |
| A19/01 |
High Frequency Train Lighting (and Train-on-Track Indication) |
33.1 kb |
01-Jul-1996 |
| A19/02 |
A High Quality Sine Wave generator |
41.8 kb |
01-Oct-1999 |
| A20/01 |
The MERG Simple Shuttle (Demonstration track) |
47.3 kb |
01-Aug-1997 |
| A21/01 |
Low Cost Current Display using a LED bargraph |
36.7 kb |
01-Nov-1996 |
| A23/01 |
An Overload protected Controller Output stage |
21.7 kb |
01-Sep-1996 |
| A24/01 |
Road Traffic Lights sequencer |
27.0 kb |
01-Oct-1996 |
| A25/01 |
A Touch Switch for Control panels |
47.1 kb |
01-Nov-1996 |
| A26/01 |
Servo Motor Driver (applied to loco water crane swing in & out!) |
29.6 kb |
01-Dec-1996 |
| A29/01 |
Single Wire Point Motor Switching Unit |
54.5 kb |
01-Jan-1998 |
| A30/01 |
Matrix Operation of Point Motors |
48.7 kb |
01-Feb-1998 |
| A31/01 |
Matrix Control for Point Motors |
20.1 kb |
01-May-1998 |
| A32/01 |
A Fast Analogue Clock |
23.6 kb |
01-Aug-2000 |
| A32/02 |
An Analogue Scale Time Clock |
77.3 kb |
01-Aug-2000 |
| A33/01 |
Section Isolating Switch with Isolation and Occupation Indication |
33.0 kb |
01-Aug-1999 |
| A33/02 |
Pulse generator for Isolated/occupied indication |
24.3 kb |
01-Aug-1999 |
| A34/01 |
Development of a Dual Point Motor (Solenoid type)Driver |
50.8 kb |
01-Aug-1999 |
| A35/01 |
Instrumentation for a 7 1/4" Gauge Battery Loco |
24.8 kb |
01-May-2001 |
| A36/01 |
The Faller Road System - Introduction |
28.0 kb |
01-Mar-2003 |
| A36/02 |
The Faller Road System - Route Selection and Parking |
64.4 kb |
01-Oct-2004 |
| A38/01 |
Programmable Servo Driver type "Servo 4" |
66.6 kb |
01-Jul-2007 |
| A38/02 |
Setting Box for Servo 4 Driver Board |
115.9 kb |
01-Aug-2008 |
| A39/01 |
A Simple RFID Reader Module |
117.0 kb |
01-Oct-2007 |
| A39/02 |
Putting RFID to Work 1 - Basic Principles and Installation |
318.6 kb |
01-Jan-2012 |
| A40/01 |
Stepper Motor Turntable Controller |
288.3 kb |
01-Mar-2010 |
| A40/02 |
Putting the Turntable Controller (Stepper Motor) Kit 79 to Use |
1,383.7 kb |
01-Jun-2020 |
| A41-01 |
Putting the Megapoints Servo Controller to Use |
1,012.7 kb |
01-Dec-2017 |
| Automatic Train Control | TOP OF PAGE |
| ATC01/02 |
The ATC Shuttle Control System - An Overview |
1,029.3 kb |
01-Jul-2020 |
| ATC02/01 |
The ATC Shuffle Mode |
130.6 kb |
01-Jan-2013 |
| ATC03/01 |
Testing and Setting Up a Standard ATC System |
2,100.6 kb |
01-Jan-2013 |
| ATC04/01 |
Putting the ATC to Work 1 - Planning Your Configuration |
498.8 kb |
01-Feb-2013 |
| ATC05/01 |
Putting the ATC to Work 2 - Creating PIC Sequences |
293.1 kb |
01-Feb-2013 |
| ATC06/01 |
Putting the ATC to Work 3 - Using the Excel Configuration Spreadsheet |
440.7 kb |
01-Mar-2013 |
| Automatic Train Control 2 | TOP OF PAGE |
| ATC2-07 |
Automatic Train Ccontrol 2 - Overview |
3,539.6 kb |
01-Jun-2023 |
| ATC2-08 |
ATC2-08 - ATC2 Shuffle Mode -WIP-TBA |
9.0 kb |
01-Jun-2023 |
| ATC2-09 |
Automatic Train Control 2 - Testing and Setting Up the ATC2 system |
322.9 kb |
01-Aug-2023 |
| CBUS® | TOP OF PAGE |
| CBUS-00 |
CBUS - A universal layout control system. |
262.2 kb |
01-Dec-2008 |
| CBUS-01 |
CANACC8 - 15Vac CBUS Module for driving LEDs, Lights and Relays |
579.5 kb |
01-Feb-2017 |
| CBUS-02 |
CANACC4 - 15Vac CBUS Module for driving Solenoid Point Motors |
676.4 kb |
01-Feb-2017 |
| CBUS-10 |
Planning for CBUS on your Layout |
476.4 kb |
01-Dec-2019 |
| CBUS-12 |
CANSOL - 12Vdc CBUS Module for driving Solenoid Point Motors |
959.5 kb |
01-Apr-2015 |
| CBUS-13 |
CANPAN - 12Vdc CBUS Module for driving Control Panels |
1,206.5 kb |
01-May-2019 |
| CBUS-14 |
CANMIO - 16 channel Multiple Input Output module |
10.3 kb |
01-Apr-2017 |
| CBUS-15 |
CANPiWI - CBUS WiFi Interface Module |
78.1 kb |
01-Apr-2017 |
| CBUS-17 |
CANGIZMO - CBUS Module Bench Tester |
2,573.5 kb |
01-Sep-2018 |
| CBUS-20/11 |
CANVOUT - 12V DC CBUS Module with 8 outputs and 8 inputs |
2,374.3 kb |
01-Jan-2020 |
| CBUS-20/12 |
CANVINP - 2nd gen 12V DC CBUS Module with 16 inputs |
1,148.3 kb |
01-Nov-2023 |
| CBUS-20/13 |
CANVSERVO 2nd gen 8 Servos + 8 inputs |
2,622.9 kb |
01-Jun-2021 |
| CBUS-20/14 |
CANV4BIP - 12V DC CBUS Module with 4 motorised point drivers and 8 inputs |
2,692.9 kb |
01-Apr-2020 |
| CBUS-21 |
CANINP 8 input replacement of CANACE8C |
622.6 kb |
01-Nov-2023 |
| CBUS-22 |
CANOUT 8 output replacement of CANACC8 |
682.1 kb |
01-Nov-2023 |
| CBUS-23 |
Arduino CAN bus shield. |
1,252.7 kb |
01-Mar-2024 |
| G32/03 |
CANACC5 - CBUS module for motorised point drivers etc. |
313.1 kb |
01-Jan-2008 |
| G32/04 |
CANACE3 - CBUS module for Control Panels |
100.5 kb |
01-Jan-2008 |
| G32/05 |
CAN-RS - An interface module between CBUS and Serial RS-232 |
220.1 kb |
01-Aug-2008 |
| G32/06 |
CANACE8C - CBUS 8 input combination module |
161.2 kb |
01-Nov-2009 |
| G32/07 |
CANLED - CBUS module for driving 64 LEDs |
107.5 kb |
01-Jan-2008 |
| G32/08 |
CANSERVO8 CBUS module for driving R/C Servos |
50.7 kb |
01-Dec-2008 |
| G32/11 |
Using the CBUS Experimenters Kit, Kit 90 |
147.4 kb |
01-Aug-2012 |
| Comp./Command Control | TOP OF PAGE |
| CC02/01 |
The Interlocker System (Computer Control of Model Railways) |
32.3 kb |
01-Jul-1998 |
| CC02/02 |
The Interlocker System - the Hardware (Issue 3) |
42.7 kb |
01-Jul-1998 |
| CC02/06 |
The Signalman System (Peter J. Day M508) |
67.9 kb |
01-Apr-2001 |
| CC02/11 |
Computer Control in the Vale (Pendon Museum) |
17.8 kb |
01-May-1995 |
| CC03/01 |
The I2C Interfacing system and its relevance to Model Railways |
28.4 kb |
01-Apr-1999 |
| CC04/01 |
Command Control Route Indication |
40.5 kb |
01-Aug-1999 |
| CC04/02 |
Command Control Train on Track Indication using MERG TOTIs and Power supply |
30.0 kb |
01-Aug-1999 |
| CC05/01 |
The Airfix Multiple Train Control System |
181.4 kb |
01-Aug-2000 |
| CC21/01 |
Route Setting using a Microcontroller |
20.5 kb |
01-Apr-1996 |
| CC22/01 |
Computer-controlled Fiddle Yard project |
43.2 kb |
01-Jul-1996 |
| CC23/01 |
What you need to know to use the PIC Microprocessor |
18.1 kb |
01-Aug-1997 |
| CC23/02 |
Programming a PIC Microprocessor |
34.5 kb |
01-Aug-1997 |
| CC24/01 |
Computers and Model Railways - an Overview |
28.9 kb |
01-Oct-1997 |
| Components | TOP OF PAGE |
| B01/01 |
Preferred Values for electronic components |
31.7 kb |
30-Nov--0001 |
| B02/01 |
Resistor colour coding |
43.3 kb |
01-Dec-2007 |
| B04/01 |
A Summary of Op Amps |
24.2 kb |
01-Jul-1996 |
| DCC | TOP OF PAGE |
| DCC01/01 |
Getting into DCC - a review of several commercial systems |
20.2 kb |
01-Jan-1999 |
| DCC02/01 |
Introduction to NMRA Digital Command Control |
28.5 kb |
01-Jan-2001 |
| DCC02/02 |
NMRA Decoder Configuration Variables (CVs) for ZTC / Lenz / Digitrax |
21.7 kb |
01-Jan-2001 |
| DCC03/01 |
Building a DCC decoder for N gauge |
32.6 kb |
01-Mar-1998 |
| DCC04/02 |
DCC Loco Conversions |
54.7 kb |
01-Jan-2000 |
| DCC11_05 |
MERG DCC8 Command Station - DEscription and Operation |
301.8 kb |
01-Jul-2020 |
| DCC11/03 |
MERG DCC handset HS2 (Rev B): Technical description and use |
50.6 kb |
01-Oct-2003 |
| DCC11/11 |
MERG DCC Accessory System: Overview, & Testing Assembled Kits |
74.6 kb |
01-Apr-2006 |
| DCC11/12 |
The MERG DCC Accessory Encoder (Version 2B) |
148.6 kb |
01-Apr-2006 |
| DCC11/13 |
The MERG DCC Pulsed Output Accessory Decoder (Version 2B) |
178.3 kb |
01-Oct-2003 |
| DCC11/14 |
The MERG DCC Accessory Decoder Version 3B - Steady State outputs. |
152.4 kb |
01-Jul-2006 |
| DCC11/19 |
Further Uses for the MERG DCC Steady State Accessory Decoder |
110.5 kb |
01-Apr-2009 |
| DCC20-01 |
The MERG 2nd gen DCC User's Guide |
657.7 kb |
01-Jul-2013 |
| DCC21/05 |
The MERG 2nd Generation DCC System |
1,177.7 kb |
01-Jul-2021 |
| Electronic Techniques | TOP OF PAGE |
| ETEC-01 |
USB to Parallel Bus Interface (MERG-USB) |
322.0 kb |
01-May-2015 |
| General | TOP OF PAGE |
| G01/01 |
Transistors |
44.3 kb |
01-Mar-2001 |
| G02/01 |
Relays - updated |
21.1 kb |
01-Apr-2001 |
| G02/03 |
Latching Relays (and use for vehicle directional lighting) |
22.7 kb |
01-May-2001 |
| G03/01 |
Digital logic |
162.7 kb |
01-Feb-2010 |
| G05/01 |
Microprocessors and model railways - updated |
34.5 kb |
01-Apr-2001 |
| G06/01 |
Computer interfacing (Parts 1 & 2) |
88.8 kb |
01-Feb-2001 |
| G07/01 |
Multiplexing |
22.5 kb |
01-Mar-2001 |
| G08/01 |
A practical introduction to logic circuits |
108.1 kb |
01-Aug-1994 |
| G09/01 |
A loco controller using the Sinclair Spectrum with postscript |
69.8 kb |
01-Jan-2001 |
| G10/01 |
Sound and model railways |
34.3 kb |
01-Jan-1987 |
| G12/01 |
Diode - FET logic - a new family ? |
261.4 kb |
01-Jan-1989 |
| G13/01 |
A novel approach to layout wiring diagrams |
32.2 kb |
01-May-2000 |
| G14/01 |
The on-board controller |
208.6 kb |
01-Feb-1992 |
| G15/01 |
Loco controller using the Centronics interface |
75.9 kb |
01-Mar-1992 |
| G16/51 |
A Computer-controlled Throttle unit |
192.4 kb |
01-Sep-2000 |
| G16/55 |
An introduction to Tcc (Train control centre) software |
384.1 kb |
01-Oct-2005 |
| G16/56 |
Writing scripts for TCC - A tutorial |
346.4 kb |
01-Jul-2005 |
| G16/71 |
Layout Wiring: a radically new approach |
78.4 kb |
01-Sep-2000 |
| G16/72 |
Layout wiring Part 2: Assembling PtP and RPC kits: Installation and testing |
54.6 kb |
01-Feb-2001 |
| G16/85 |
Model Railway Computer Control Centre (MRCCC): Overview |
211.6 kb |
01-Jul-2005 |
| G16/86 |
Model Railway Computer Control Centre (MRCCC): User Guide |
266.3 kb |
01-Jul-2005 |
| G16/87 |
Computer Assisted Cab Control (CACC) |
243.1 kb |
01-Mar-2006 |
| G18/01 |
CARLOS unveiled - Your Control Panel on your PC Screen |
159.8 kb |
01-Nov-1999 |
| G19/01 |
Notes on the use of Memory Wire |
36.8 kb |
01-Apr-1997 |
| G19/02 |
Memory Wire for Points Actuation - comparison of 'One Way' and 'Reversing' wire |
45.8 kb |
01-Oct-1997 |
| G20/01 |
A simple voltage indicator |
33.7 kb |
01-Aug-1998 |
| G22/01 |
A Memory wire Turnout Operating Unit - MWTOU |
79.1 kb |
01-Nov-1998 |
| G23/01 |
Constant current driver for Memory wire |
22.7 kb |
01-Feb-1999 |
| G23/02 |
Adjustable drive circuit for Memory wire |
18.7 kb |
01-Dec-2000 |
| G24/01 |
Analogue Controllers for a G gauge Garden Railway |
85.1 kb |
01-Nov-1999 |
| G24/02 |
Train servo amplifier Testing (as used for G24/1) |
26.6 kb |
01-Dec-1999 |
| G25/01 |
Using the 555 timer |
104.8 kb |
01-Jan-2000 |
| G26/01 |
A Moving Message Simulator |
42.7 kb |
01-Feb-2001 |
| G27/01 |
Solid State Overload Protectors |
73.5 kb |
01-Jun-2000 |
| G28/01 |
Diode Controlled Slow and Stop sections |
73.1 kb |
01-Aug-2000 |
| Layout Cabling | TOP OF PAGE |
| LC01/03 |
Guidance for Model Railway Layout Cabling |
498.5 kb |
01-Feb-2024 |
| LC02/01 |
Point to Point-Lite (PTP-Lite) |
735.2 kb |
01-Aug-2014 |
| LC02/02 |
Putting PTP-Lite to Work - External Interfacing |
798.1 kb |
01-Aug-2014 |
| LC02/03 |
Putting PTP-Lite to Work - System Installation |
512.8 kb |
01-Oct-2015 |
| LC02/04 |
PTP-Lite - USB and Serial Interface Backplanes |
682.5 kb |
01-Oct-2015 |
| LC02/05 |
Putting PTP-Lite to Work - RFID Data Transport |
445.6 kb |
01-Oct-2015 |
| Practical | TOP OF PAGE |
| P01/01 |
Practical Guide to Crimping and Insulation Displacement Connectors (IDC) |
38.7 kb |
01-Apr-2003 |
| P02/01 |
Guidance for Building a Typical MERG Electronic Kit |
284.2 kb |
01-Sep-2022 |
| References | TOP OF PAGE |
| R05/01 |
Bibliography:'Electrical and Electronics' Series, NMRA Bulletin (US) |
32.8 kb |
30-Nov--0001 |
| R09/01 |
Model Railway Electronics - Index to Friberg books 1, 3 & 4. |
63.1 kb |
01-Feb-2007 |
| R10/01 |
Book Index- A Practical Introduction to Surface Mount Devices |
33.3 kb |
01-Jan-2003 |
| RPC | TOP OF PAGE |
| G16/00 |
Remote Panel Control(RPC) System - Progress Report No. 1 |
40.1 kb |
01-Aug-1995 |
| G16/01 |
Remote Panel Control(RPC) System - Progress Report No. 2 |
44.3 kb |
01-Dec-1995 |
| G16/02 |
RPC System - Index to bulletins G16/3 - G16/24 |
29.0 kb |
01-Feb-1999 |
| G16/03 |
RPC System - System Overview |
214.5 kb |
01-Mar-1996 |
| G16/04 |
RPC System - Interface Specification |
85.4 kb |
01-Nov-2001 |
| G16/05 |
RPC System - RPI Remote Panel Interface |
98.4 kb |
01-Nov-2001 |
| G16/06 |
RPC System - DPR Module (8 Relay switching) |
319.4 kb |
01-Feb-1997 |
| G16/07 |
RPC System - SR04 Module (32 bit O/C Digital O/P) |
185.6 kb |
01-Aug-2002 |
| G16/08 |
RPC System - FTC Floating Track Circuit Module (8 track circuits) |
556.1 kb |
01-May-1997 |
| G16/12 |
RPC System - RTC Train Speed Controller |
260.4 kb |
01-Jan-1996 |
| G16/13 |
RPC System - PMD1 Solenoid Point Motor Driver (see G16/26 for On-board DPDT relay module) |
86.1 kb |
01-Jan-0000 |
| G16/14 |
RPC System - PMD2 Slow-action Point Motor Driver |
152.0 kb |
01-Jun-1999 |
| G16/15 |
RPC System - PMS2 Slow-action Point Motor Slave |
95.6 kb |
01-Jun-1999 |
| G16/16 |
RPC System - SD4 Multi-aspect Colour Light Signal Driver |
105.5 kb |
01-Jun-1999 |
| G16/17 |
RPC System - QPR Quad pole relay board |
80.5 kb |
01-Jul-2007 |
| G16/18 |
RPC System - RSA RS232/RS485 Adaptor |
191.9 kb |
01-Sep-1999 |
| G16/19 |
RPC System - SRI4 32 bit shift register logic input module |
96.6 kb |
01-Feb-1999 |
| G16/21 |
RPC System - Alternative Uses (non-computer applications) |
109.8 kb |
01-Jul-1998 |
| G16/22 |
RPC System - Serial/Shift register techniques (A general description but with special reference to the RPC system) |
158.7 kb |
01-Feb-1999 |
| G16/23 |
RPC System - PTP Point to Point data transfer |
165.0 kb |
01-Feb-2004 |
| G16/24 |
RPC System - RSE Remote Stack Extension system - to extend any RPC module stack |
248.5 kb |
01-Nov-1999 |
| G16/25 |
RPC System - RDD Remote Data Display |
175.5 kb |
01-Oct-1999 |
| G16/26 |
RPC System - PMR1 Solenoid Point Motor/Relay driver with on board relay. |
83.7 kb |
01-Mar-2003 |
| G16/27 |
RS232 - RS485 Buffer |
90.9 kb |
01-Feb-2001 |
| G16/75 |
Implementing a RPC System on a Home Layout |
493.4 kb |
01-Apr-2005 |
| G16/81 |
RPC Application on \'Horton\' |
792.2 kb |
01-Apr-2005 |
| G16/xx |
RPC System - The Nottingham Exhibition report (RPC\'s first public outing) |
48.6 kb |
01-Jan-1996 |
| Signalling | TOP OF PAGE |
| S01/01 |
Wiring complex pointwork |
68.9 kb |
01-Dec-2004 |
| S02/01 |
ENtrance EXit (NX) Route switching |
38.3 kb |
01-Jun-1995 |
| S04/01 |
NMRA dc 2-rail track circuiting system (with additional notes) |
20.6 kb |
30-Nov--0001 |
| S06/01 |
Signal Operation and Automatic restoration |
30.2 kb |
01-Jun-1998 |
| S11/01 |
I.R.I.S. - Independant Remotely Interlocked Section |
128.8 kb |
01-Aug-1991 |
| S12/01 |
Four Aspect Signals - Multiplex operation over 1 or 2 wires |
53.8 kb |
01-Feb-1995 |
| S13/01 |
The ENtrance EXit (NX) Panel - Prototype information |
23.2 kb |
01-Jul-1996 |
| S14/01 |
Simple Colour Lights signals for two sections (uses reed switch detection) |
23.5 kb |
01-Jul-1996 |
| S15/01 |
A Noise Resistant Bistable - includes use for reed switch operated 2-aspect signal |
16.2 kb |
01-Jan-1998 |
| S16/01 |
2-wire control for 4-aspect signals |
20.0 kb |
01-Apr-1999 |
| S17/01 |
A Damped Motor for 2mm scale Semaphore Signals |
33.2 kb |
01-Apr-1999 |
| S18/01 |
Electrical Interlocking of Points and Signals |
45.7 kb |
01-Feb-2001 |
| S19/01 |
The SD2 Signal Driver |
50.3 kb |
01-Oct-2007 |
| S19/02 |
Basic Principles of Using the SD2 Signal Driver Kit (DC or DCC) |
99.5 kb |
01-Oct-2007 |
| SuperBloc | TOP OF PAGE |
| T33/01 |
The SuperBloc Concept and the BC3 Controller |
78.6 kb |
01-Jun-2002 |
| T33/02 |
Block Control Philosophy |
94.9 kb |
01-Oct-2002 |
| T33/11 |
SuperBloc BC3 Technical Description and Schematics |
135.0 kb |
01-Jun-2003 |
| T33/12 |
Testing a superBloc BC3 controller |
38.9 kb |
01-Jan-2008 |
| T33/13 |
SuperBloc Power Supplies |
77.1 kb |
01-Jul-2003 |
| T33/14 |
SuperBloc Control of Turnouts/Points/Switches |
62.0 kb |
01-Dec-2002 |
| T33/15 |
How to create a Macroblock \'Cookbook\' for SuperBloc design. |
143.9 kb |
01-Apr-2003 |
| T33/16 |
A Single Track End-to-End Layout for SuperBloc |
85.7 kb |
01-Jul-2003 |
| T33/17 |
SuperBloc Control of a Fixed Twin Track Layout |
75.3 kb |
01-Jul-2003 |
| T33/18 |
SuperBloc Controls for a Modular Layout |
71.8 kb |
01-Jul-2003 |
| T33/19 |
A superBloc Starter Layout |
65.3 kb |
01-Jan-2008 |
| T33/20 |
SuperBloc Control of Signals |
65.5 kb |
01-Dec-2002 |
| T33/21 |
PD3 Dual Solenoid Point Motor Driver with SuperBloc Logic Options |
166.8 kb |
01-Dec-2006 |
| T33/22 |
Using the SD2 signal driver with superBloc |
65.3 kb |
01-Dec-2007 |
| T33/23 |
Simple Signal Drivers for superBloc |
32.2 kb |
01-Aug-2007 |
| T33/24 |
PD3 Boost Converter for superBloc |
97.9 kb |
01-Mar-2010 |
| T33/25 |
A low cost Optical Detector and trains longer than a block |
126.9 kb |
01-Mar-2010 |
| T33/26 |
An automatic Point Lock for superBloc |
75.6 kb |
01-Mar-2010 |
| T33/27 |
SuperBloc Hints and Tips |
82.6 kb |
01-Mar-2010 |
| T33/28 |
Station Stop Timers for superBloc |
80.3 kb |
01-Mar-2010 |
| TEST Modules | TOP OF PAGE |
| TEST-01 |
Using the Layout Control Bus (LCB) Experimenter’s Kit (490) |
805.2 kb |
01-May-2015 |
| Traction | TOP OF PAGE |
| T01/01 |
Some new ac motors and thoughts thereon |
63.7 kb |
01-Jun-1995 |
| T02/01 |
A fixed height pulse controller |
24.3 kb |
01-Jul-1997 |
| T03/01 |
MERG MILLION controller |
16.4 kb |
01-May-1995 |
| T04/01 |
The Walshaw variant of the MERG MILLION controller |
27.9 kb |
30-Nov--0001 |
| T05/01 |
Motor control |
17.4 kb |
01-Apr-1996 |
| T06/01 |
Closed loop motor control |
91.3 kb |
01-Feb-1997 |
| T07/01 |
CMOS in model railway electronics |
100.8 kb |
01-Dec-1996 |
| T08/01 |
Traction supply (draft only) |
26.9 kb |
01-Jan-2007 |
| T12/01 |
An integrated controller using the LM317 |
51.1 kb |
01-Apr-1999 |
| T14/01 |
Controlling dc permanent-magnet motors used in model locomotives |
18.6 kb |
01-May-2001 |
| T15/01 |
A simple overload trip - theory |
30.4 kb |
01-Feb-1997 |
| T15/02 |
A simple overload trip - construction |
498.6 kb |
16-Jun-1905 |
| T16/01 |
A Linear controller with overload protection |
32.5 kb |
01-Feb-1997 |
| T17/01 |
A single knob controller |
46.2 kb |
01-Feb-1997 |
| T18/01 |
Wired and cordless controllers using joysticks |
115.2 kb |
01-Dec-1991 |
| T19/01 |
A hybrid pulse-width modulated (PWM) controller |
100.4 kb |
01-Nov-1993 |
| T20/01 |
Diesels with "real engines" using a free motor |
39.6 kb |
01-Jun-1999 |
| T23/01 |
A Computer-compatible Pulse Controller |
97.5 kb |
01-Aug-1994 |
| T24/01 |
DC Motor Control by Negative Resistance |
64.7 kb |
01-Oct-1996 |
| T25/01 |
The Ultimate Track Circuit Detector ? |
76.2 kb |
01-Mar-1998 |
| T26/01 |
Single Knob Walkaround Control |
94.8 kb |
01-Aug-1998 |
| T27/01 |
A Pulsed Linear Controller |
40.3 kb |
01-Jan-2000 |
| T27/02 |
A Timed-reset Current Trip |
28.4 kb |
01-Jan-2000 |
| T28/01 |
Track-based Cab Control |
162.3 kb |
01-Apr-2000 |
| T31/01 |
A Fixed Width Pulse Controller (FWP) |
102.0 kb |
01-Feb-2002 |
| T32/01 |
Reversed Linked Section Control (RLSC) |
177.1 kb |
01-Apr-2002 |
| Train Detection | TOP OF PAGE |
| A07/04 |
Hall effect switch as Train-on-Track Indicator |
22.9 kb |
01-Dec-1998 |
| S03/01 |
MERG Train On Track Indicator (ToTI) (incorporating S10/1) |
22.2 kb |
01-Jan-0000 |
| S07/01 |
Locomotive Isolated Detector |
60.1 kb |
01-May-1995 |
| S08/01 |
Train Detection - report on meeting (talk and discussion) |
16.9 kb |
01-Oct-1983 |
| S09/01 |
Transducers - or where is it? |
45.0 kb |
01-Mar-1985 |
| T09/01 |
2-rail track circuits |
48.5 kb |
01-Aug-1994 |
| T09/02 |
HYPOTRAC - a 2-rail circuit |
113.7 kb |
01-Jun-1994 |
| T21/01 |
Train-on-track indicator by comparator |
45.8 kb |
01-Oct-1996 |
| T21/02 |
Train-on-track indicator by comparator (Assembly & Test Instructions) |
61.4 kb |
01-Jul-1995 |
| T21/04 |
Dual Power Supply Module |
143.0 kb |
01-Oct-2014 |
| T21/05 |
Train-on-track indicator by comparator: version 3 |
218.3 kb |
01-Mar-2007 |
| T21/06 |
ToTI-2 – A 2 channel Train on Track Indicator by comparator: Version 4. |
1,255.3 kb |
01-Nov-2020 |
| T22/01 |
Train-on-Track Indication using Reed or Hall Effect switches |
124.2 kb |
01-Feb-1995 |
| T29/01 |
Train on track indication using a Flip Flop |
15.8 kb |
01-Jan-2001 |
| T30/01 |
Yet another Train on track indication (YaToTi) |
25.6 kb |
01-Mar-2001 |
| TD01/01 |
Dual Hector User manual |
4,380.5 kb |
01-Sep-2014 |
| Zero | TOP OF PAGE |
| CC01/01 |
ZERO-1 Command link |
84.0 kb |
01-Feb-1998 |
| CC01/02 |
ZERO-1 Slave controller unit - including modification for double heading |
61.8 kb |
01-Feb-1998 |
| CC01/03 |
ZERO-1 Slave controller (operation & modifications) |
58.8 kb |
01-Jan-2001 |
| CC01/05 |
ZERO-1 Display console & module (MicroMimic/Phase 3) |
36.8 kb |
01-Jan-2000 |
| CC01/06 |
ZERO-1 Point accessory module amplifier |
19.3 kb |
01-Apr-1990 |
| CC01/07 |
ZERO-1 MicroMimic console - battery & inspection |
17.6 kb |
01-Nov-1998 |
| CC01/08 |
ZERO-1 Loco module - a quick look |
32.0 kb |
01-Dec-1998 |
| CC01/09 |
ZERO-1 MicroMimic Display System (Mfrs. brochure plus comments) |
637.5 kb |
01-May-1995 |
| CC01/10 |
ZERO-1 Loco module coding chart |
22.0 kb |
01-Jan-1999 |
| CC01/12 |
ZERO-1 Master Controller Replacement Keyboard (Kit instructions) |
25.0 kb |
01-Sep-1998 |
| CC01/14 |
ZERO-1 Accessory Module R956 (Technical description and schematic) PB003 |
48.0 kb |
01-Oct-1998 |
| CC01/15 |
ZERO-1 Slave Cable Buffer (Slave connections at over 2 metres) PB001 |
32.9 kb |
01-Oct-1998 |
| CC01/17 |
ZERO-1 Modification of AC locos for Zero-1 operation PB002 |
26.0 kb |
01-May-1998 |
| CC01/18 |
ZERO-1 Loco module current booster PB004 (NB. 1.17 and 1.18 will be supplied printed back to back for the single TB price). |
25.1 kb |
01-Jan-2000 |
| CC01/20 |
ZERO-1 Stabilised Power Booster PB005 |
23.0 kb |
01-Oct-1998 |
| CC01/22 |
ZERO-1 Accessory Module Extender |
22.5 kb |
01-Oct-1998 |
| CC01/23 |
Coding ZTC Loco Modules using ZERO-1 Controllers (Hornby and H&M) |
54.5 kb |
01-Feb-2000 |
