Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |
| glossary:hysteresisloop [2013/04/15 14:39] – Bob Vetterlein | glossary:hysteresisloop [2014/11/11 13:29] (current) – external edit 127.0.0.1 |
|---|
| | ====== Hysteresis Loop - RPC Demonstration====== |
| |
| | The track on this demo is divided into 8 sections, these are monitored for occupation using a DTC, MERG Kit 56. The two points are driven using PMR1 kits, one is clearly visible in the foreground of the [[exhibition_stand|photo]], mounted on the point motors are switches which are used to feed back the actual point position via a SRI4 kit. The signals, which are for demonstration only and are not intended to be scale models, consist for the most part of 4 LEDs which are individually driven by a SRO4 kit. The loco is DCC fitted and is driven from a custom built DCC Command station, not available as a kit. All the modules, with the obvious exception of the PMR1s, are contained within a [[hystloopbox|control box]] which is connected to the demo by three cables, two of which are visible in the photo. The PMR1, SRI4 & SRO4 kits are part of a range known as [[rpcsystem|RPC]] (Remote Panel Control) and were designed before the Kit Locker existed in its current form and as a consequence are only available from Gordon Hopkins. |
